Call 08048601280 74% Response Rate

our range

Industrial Chiller

Industrial Chiller :

Chillers have become an essential HVAC component of a wide variety of commercial facilities, including hotels, restaurants, hospitals, sporting arenas, industrial and manufacturing plants, etc.
Water-Cooled Chillers:

Water-cooled chillers feature a water-cooled condenser connected with a cooling water. They have commonly been used for medium and large installations that have a sufficient water supply. Water-cooled chillers can produce more constant performance for commercial and industrial air conditioning because of the relative independence to fluctuations of the ambient temperature.

Air-Cooled Chillers:

Air-cooled chillers rely on a condenser cooled by the environment air. Thus, air-cooled chillers may find common application in smaller or medium installations where space constraints may exist. An air-cooled chiller can represent the most practical choice in scenarios where water represents a scarce resource.

A typical air-cooled chiller can feature propeller fans or mechanical refrigeration cycles to draw ambient air over a finned coil to condense the refrigerant. The condensation of the refrigerant vapor in the air-cooled condenser enables the transfer of heat to the atmosphere.

  • Water Cooled Chiller 5TR 10TR Industrial Type
  • Water Cooled Chiller 5TR 10TR Industrial Type
Water Cooled Chiller 5TR 10TR Industrial Type

Water Cooled Chiller 5TR 10TR Industrial Type

Rs 1.5 Lakh  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Capacity5 ton
PhaseThree Phase
Usage/ApplicationIndustrial
Voltage380V/50HZ
BrandHynaar
Model Name/NumberL5W
Compressor TypeHigh Efficiency Copper Aluminum Fins
Cooling Capacity15-130 KW/H
Power5~49 KW
TypeR22 / R134a / R407c
MaterialMS
Item CodeL10W
No Of Compressor2
EvaporatorStainless Steel 304 Water Tank
No. Of Compressor2
Tank Capacity50-350L
I Deal InNew Only
Model selection parameter:(Please provide following parameters, Our sales staff will choose the suitable machine for you.1.What is the max ambient temperature in your factory?2.What's your request of minimum cooling temperature?3.What's your voltage ?Including frequency and Hertz4.What's your choice of refrigerant? R22/R407c/R134a or others?5.What is the maximum cooling capacity(KW/kcal/h) you need?

Water Cooled Chiller:
High-efficiency air-cooled condenser high-speed punch punch perforation, the quality of the piece is reliable. Second turn edge, copper pipe and fins more closecontact, heat exchange efficiency, the use of fully imported copper pipe and automatic elbow welding, greatly enhance the air tightness, to eliminate refrigerant leakage phenomenon. It is particularly suitable for use in areas where water resources are scarce or water quality is high.

Evaporator core corrosion resistance, good thermal conductivity, high temperature, heat exchange performance, non-polluting media (non-toxic), not easy to scale, non-magnetic, not easy to leak. The inner core adopts a high-strength sealing structure, which is sealed well and increases heat exchange performance.

The use of 304 full stainless steel thick water tank, one welding molding, rust-proof, anti-corrosion, put an end to water pollution, once wiped, as fresh as new.Inside the automatic rehydration device, high-efficiency internal thread double-layer copper coil, real foot number evaporator, with large stainless steel water tank, quickly reduce heat, to achieve cooling effect.Compared with other machines of the same model, more cooling capacity, higher efficiency, more energy saving, cleaning and maintenance more convenient and fast.

Product Name Water-cooled Chiller
Refrigeration Capacity 15~164 KW
Refrigerant Type R22 / R134a / R407c
Control Method Outside The Balanced Thermal Expansion Valve
Evaporator Types Tank Coil
Chilled Water 2.6~28.2 m³/h
Water Tank 50~350 L
Condenser Type Shell And Tube
Cooling Water 3.5~37.9 m³/h
Pump Power 0.37~4.5 KW
Lift 20~52 M


Additional Information:

  • Production Capacity: As Per Requirement
  • Delivery Time: As per stock availability
  • Packaging Details: Export wooden case

View Complete details

get quote request a call back
  • Air Cooled Chiller 10HP Industrial
  • Air Cooled Chiller 10HP Industrial
  • Air Cooled Chiller 10HP Industrial
  • Air Cooled Chiller 10HP Industrial
Air Cooled Chiller 10HP Industrial

Air Cooled Chiller 10HP Industrial

Rs 3.5 Lakh  / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Product Brochure

PhaseThree Phase
Voltage380V/50HZ
BrandHynaar
Model Name/NumberLF10A
Compressor TypeHigh Efficiency Copper Aluminum Fins
Cooling Capacity13-120 KW/H
Power0.37~4.5 KW
MaterialMS
Item CodeLF10A
No Of Compressor2

Our Chiller provides economical refrigeration solutions for the plastic industry, electronic industry, electroplating industry, mechanical industry, construction industry, vacuum coating industry, food industry, pharmaceutical industry, and other industries.

Chiller is a kind of cooling water equipment that can provide a constant temperature, constant flow and constant pressure.

Industrial chiller can always output ice water with a temperature lower than the ambient temperature. It can uses where the temperature needs to be reduced. It can directly cools or indirect heat exchanged.

The chiller can be used to reduce the temperature of injection molds and improve the quality of plastic products; vacuum coating and cooling to control the temperature of the vacuum coating machine; food industry cooling and rapid cooling processing; chemical industry to effectively control the temperature of chemicals; building cooling and rapid concrete cooling Condensation etc.

The chiller is a type of refrigeration equipment that cools and recycles water. The cooling water temperature can be automatically acted in line with requirements. It almost does not consume water. Long-term use can save one lot of water. Therefore, compared to the mode of cooling the equipment by using tap water discharge, Industrial chiller is an ideal equipment that can make the equipment quickly reach the ideal cooling effect and save energy.

The Air-cooled Chiller is to provide a cooling process for better industrial production. In the plastic molding industry, it improves the quality of molded products and shortens the period of injection molding cycles. Hence maximizes the productivity of plastic molding manufacturing.  

And water could be used in various different industries, just depends on the needs.

Product Name: Air-cooled Chiller, Industrial Water Chiller, Water Chiller

Refrigeration Capacity: 13~143 KW

Refrigerant: R22 / R134a / R407c

Control Method: Outside The Balanced Thermal Expansion Valve

Evaporator: Water Tank Coil

Water Tank Capacity: 50~370 L

Chilled Water Flow: 2.24~24.6 m³/h

Condenser: Efficient Aluminum Finned Copper Jacket + Low Noise External Rotor Fan

Pump Power: 0.37~4.5 KW

Pump Lift: 20~52 M

 

Product Features

1. Using the international advanced scroll or piston compressor, the components of electrical appliances and refrigeration systems are world brand products.

2. Built-in stainless steel water tank, high performance, high flow special pump.

3. The bottom of the fuselage is equipped with movable casters, which are flexible and convenient to use.

4. Over 50 kW, there are double refrigeration circuits. Even if the primary circuit fails, the other circuit can run as usual.

5. Streamlined aesthetic design, operation panel convex and inclined surface design (humanized design), operation procedures at a glance.

6. Comparing with the traditional control mode, the special controller has obvious advantages, such as anti-electromagnetic interference, high resistance to cold and heat, strong control logic, sensitive response, and accurate action.

7. Comprehensive safety protection:

1) high and low-pressure protection and safety valve of the refrigeration system;

2) Double protection of compressor overload soft and hard;

3) under-phase, reverse, under-voltage and over-voltage protection of power supply;

 

4) anti-freezing protection and water flow protection of water system.



Additional Information:

  • Item Code: LF10A
  • Production Capacity: As per Requirement
  • Delivery Time: As per stock availability
  • Packaging Details: Export standard wooden case

View Complete details

get quote request a call back
  • Cooling Tower 10  to 500 Tonnages
  • Cooling Tower 10  to 500 Tonnages
  • Cooling Tower 10  to 500 Tonnages
Cooling Tower 10  to 500 Tonnages

Cooling Tower 10 to 500 Tonnages

Rs 40,000  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Usage/ApplicationIndustrial
Packaging TypeDrum
Capacity10T-500T
Inlet Flow Rate7.8 - 390 Meter Cube/Hour
Weight50-3000Kg
Model Name/NumberSVC10T
ShapeRound
Automation GradeSemi-Automatic
Size920MM Tower diameter 1700MM Height
Tower DesignCounter Flow
Temperature drop40-30 degree Celsius

The cooling tower is designed to economic and save water, it is a huge advance in the industry. We take Fibre-reinforced plastic as the materials of cooling tower.it is light, low noise and high quality. It is widely used in plastic, electronics, food, textile, chemicals, packing industrial and so on.

Cooling Tower is eco-friendly in design and advanced in technology. It has revamped the parts inside the Cooling tower, with high performance, and the product is widely used in different situations.


Principle
In a crossflow cooling tower, water is falling from above, the air and water are flow in a vertical way. Because heat dissipation material is closed to the collection basin, the advantage is reducing water falling noise. Crossflow type usually used in the square cooling tower, but the structure is fixed with a large amount of iron piece, so it cost higher than around the cooling tower.



Additional Information:

  • Item Code: SVC10T
  • Production Capacity: As per Customer Requirement
  • Delivery Time: 20days
  • Packaging Details: Wooden Frame Package

View Complete details

get quote request a call back
Water Cooling Tower 10T-500T Square

Water Cooling Tower 10T-500T Square

Rs 50,000  / pieceGet Best Price

Minimum Order Quantity: 1 piece

Cooling Capacity7.8 - 390 Meter Cube/Hour
Capacity10T-500T
Usage/ApplicationIndustrial
ShapeSquare
Tower MaterialFiberglass Reinforced Polyester
Supply PhaseThree Phase
Fan Diameter630 - 2800MM
ColorWhite
Supply Voltage380V/60HZ,3PH
Tower DesignCounter Flow

The cooling tower is designed to economic and save water, it is a huge advance in the industry. We take Fibre-reinforced plastic as the materials of cooling tower.it is light, low noise and high quality. It is widely used in plastic, electronics, food, textile, chemicals, packing industrial and so on.
Cooling Tower is eco-friendly in design and advanced in technology. It has revamped the parts inside the Cooling tower, with high performance, and the product is widely used in different situations.

Crossflow cooling tower
Principle
In a crossflow cooling tower, water is falling from above, the air and water are flow in a vertical way. Because heat dissipation material is closed to the collection basin, the advantage is reducing water falling noise. Crossflow type usually used in the square cooling tower, but the structure is fixed with a large amount of iron piece, so it cost higher than around the cooling tower.



Additional Information:

  • Item Code: SVC10TS
  • Production Capacity: As per Customer Requirement
  • Delivery Time: 20 days
  • Packaging Details: wooden Frame

View Complete details

get quote request a call back

EXPLORE MORE CATEGORIES