SV Technologies
Hasthinapuram, Chennai, Tamil Nadu
GST No. 33GWRPS4793H1ZM
Call 08048578519 71% Response Rate
Centrifugal Dryer
The plastic recycle dryer machine is for the plastic washing recycle line, the plastic recycle is crush, wash, dry and collection. this machine is to make the wet washed plastic falkes or films dry.the dirty water and the addition dust and oil is remove after this machine, the material that there will be dry and easy to do the storage and the use for the different way.
Introduction of Plastic Pellet/Flakes Drying Machine
1. This machine is mainly used to dewater granular / flake plastic material by high speed rotating blades.
2. Wholly made of stainless steel, durable, long life, easy to clean.
3. Stable operation with low noise and high working efficiency.
4. Automatic feed in and feed out functions, simple operation.
5. Used for recycling plastic flakes/pellets/chips,chopped scrap dewater;
Dewatering Machine For Plastic
Minimum Order Quantity: 1 Piece
Product Brochure
| Brand | Hynaar |
| Material | All |
| Capacity | 300-500kg/h |
| Power Consumption | 7.5KW |
| Frequency | 50H |
| Voltage | 380V |
| Automation Grade | Semi-Automatic |
| Model Name/Number | SV400 |
| Weight | 900KG |
| I Deal In | New Only |
|
echnical parameters of Dehydrator |
|
|
The Dehydrator is a device that separates the moisture contained in the material by means of spiral, push-up,and separation and dehydration by high-speed rotation. |
|
|
Model |
SV-400 |
|
Motor power |
7.5/1.5KW |
|
Capacity |
300 500 KG/H |
|
Voltage |
380V 50Hz 3Phase |
|
Speed |
1850-2000/min |
|
Screen aperture |
about 2MM (metal stamping plate) |
|
Blade thickness |
approx. 5MM |
|
Blade distance |
approx. 2MM |
|
Spindle size |
about: 400*H1200MM |
|
Dimensions |
1400*1000*1850MM |
|
Machine weight |
about 900KG |
|
Material |
The contact surface with the material is made of stainless steel |
|
Feeding port |
It adopts stainless steel spiral even pushing method, and the feeding adopts the reduction motor 1.5Kw, which is sealed and waterproof |
|
Device Configuration |
1. 100% full copper wire motor |
Additional Information:
- Production Capacity: As Per Requirement
- Delivery Time: Immediate
View Complete details
Vertical Plastic PET Flakes Centrifugal Dewatering Machine
Product Brochure
| Brand | Hynaar |
| Capacity | 300 KG/H |
| Material | Stainless Steel |
| Automation Grade | Automatic |
| Type | PP PE PET HDPE LDPE Washer Dryer |
| Motor Power | 7.5KW |
| Driving Motor | 1.5KW |
| Speed | 1850-2000/min |
This vertical centrigugal dewatering machine/ dehydration/centrifugal dryer is a perfect machine for plastic dewatering, such as PET flakes,plastic pellets, ABS granules, hard PE PP HDPE LDPE material, etc.The material will enter from the bottom and will come out from the top. There is stainless steel screen with around 3mm holes to hold the material inside. The water will be removed by the centrifuge force.
Features of vertical dewatering machine:
1-Whole made of stainless steel, durable. long-life, convenient for cleaning;
2-Rotor adjusted under dynamic balance, stable operation with low noise and high dewatering;
3-Speedy dewatering efficiency and high capacity, detachable built in dewatering screen for convenient cleaning. Good performance, stable working situation.
Technical data of vertical dewatering machine:
| Main motor power | 7.5 kw/11kw/ 15kw |
| The power of motor for process | 1.5kw |
| Rotating speed | 1500rpm |
| Blade thickness | 6mm |
| Rotor diameter | 450mm |
| Mesh diameter | 3mm |
| Mesh thickness | 2mm |
| Capacity | 300-1000kg/hr |
| Made of stainless steel | |
Additional Information:
- Item Code: SVD_400
- Production Capacity: As Per Requirement
- Delivery Time: Immediate
- Packaging Details: Wooden Pallet with PE Film
View Complete details
Plastic Flakes Centrifugal Drying Machine
Product Brochure
| Brand | Hynaar |
| Capacity | 1000Kg |
| Automation Grade | Automatic |
| Type | Dryer |
| Material | MS |
| Motor Power | 15kw |
| Driving Motor | 15KW |
Features of vertical dewatering machine:
1-Whole made of stainless steel, durable. long-life, convenient for cleaning;
2-Rotor adjusted under dynamic balance, stable operation with low noise and high dewatering;
3-Speedy dewatering efficiency and high capacity, detachable built in dewatering screen for convenient cleaning. Good performance, stable working situation.
Technical data of vertical dewatering machine:
| Main motor power | 7.5 kw/11kw/ 15kw |
| The power of motor for process | 1.5kw |
| Rotating speed | 1500rpm |
| Blade thickness | 6mm |
| Rotor diameter | 450mm |
| Mesh diameter | 3mm |
| Mesh thickness | 2mm |
| Capacity | 300-1000kg/hr |
| Made of stainless steel | |
Additional Information:
- Item Code: SVD_400
- Production Capacity: As Per Requirement
- Delivery Time: Immediate
- Packaging Details: Wooden Pallet with PE Film
Additional Information:
- Item Code: SVLT1000
- Production Capacity: As per Requirement
View Complete details
Vertical Plastic Washing And Drying Centrifugal
Product Brochure
| Brand | Hynaar |
| Capacity | 500kg |
| Automation Grade | Automatic |
| Type | Dryer |
| Material | MS |
| Motor Power | 12.5kw |
| Driving Motor | 11KW |
This vertical centrigugal dewatering machine/ dehydration/centrifugal dryer is a perfect machine for plastic dewatering, such as PET flakes,plastic pellets, ABS granules, hard PE PP HDPE LDPE material, etc.The material will enter from the bottom and will come out from the top. There is stainless steel screen with around 3mm holes to hold the material inside. The water will be removed by the centrifuge force.
Features of vertical dewatering machine:
1-Whole made of stainless steel, durable. long-life, convenient for cleaning;
2-Rotor adjusted under dynamic balance, stable operation with low noise and high dewatering;
3-Speedy dewatering efficiency and high capacity, detachable built in dewatering screen for convenient cleaning. Good performance, stable working situation.
Technical data of vertical dewatering machine:
| Main motor power | 7.5 kw/11kw/ 15kw |
| The power of motor for process | 1.5kw |
| Rotating speed | 1500rpm |
| Blade thickness | 6mm |
| Rotor diameter | 450mm |
| Mesh diameter | 3mm |
| Mesh thickness | 2mm |
| Capacity | 300-1000kg/hr |
| Made of stainless steel |
|
Additional Information:
- Item Code: SVLT500
- Production Capacity: As per requirement
View Complete details
Plastic PET/PP/PE Flakes Centrifugal Dyer
Product Brochure
| Brand | Hynaar |
| Automation Grade | Automatic |
| Material | Stainless Steel 201 |
| Type | Plastic Drying Machine |
| Motor power | 7.5/1.5KW |
| Capacity | 300 - 500 KG/H |
| Voltage | 380V 50Hz 3Phase |
| Blade thickness | approx. 5MM |
| Blade distance | approx. 2MM |
|
Technical parameters of Dehydrator |
|
|
The Dehydrator is a device that separates the moisture contained in the material by means of spiral, push-up,and separation and dehydration by high-speed rotation. |
|
|
Model |
SV-400 |
|
Motor power |
7.5/1.5KW |
|
Capacity |
300 500 KG/H |
|
Voltage |
380V 50Hz 3Phase |
|
Speed |
1850-2000/min |
|
Screen aperture |
about 2MM (metal stamping plate) |
|
Blade thickness |
approx. 5MM |
|
Blade distance |
approx. 2MM |
|
Spindle size |
about: 400*H1200MM |
|
Dimensions |
1400*1000*1850MM |
|
Machine weight |
about 900KG |
|
Material |
The contact surface with the material is made of stainless steel |
|
Feeding port |
It adopts stainless steel spiral even pushing method, and the feeding adopts the reduction motor 1.5Kw, which is sealed and waterproof |
|
Device Configuration |
1. 100% full copper wire motor |
Additional Information:
- Item Code: SV-W400
- Production Capacity: As per customer requirement
- Delivery Time: Immediate Delivery
- Packaging Details: wooden case or covered with PE film
View Complete details
Plastic Scrap Washing Machine PET Flakes
Product Brochure
| Brand | Hynaar |
| Capacity | 300 - 500 KG/H |
| Material | Stainless Steel |
| Automation Grade | Semi-Automatic |
| Type | Plastic Drying Machine |
| Motor Power | 7.5KW |
| Driving Motor | 1.5KW |
| Voltage | 380V 50Hz 3Phase |
| Speed | 1850-2000/min |
The plastic dewatering machine is suitable for use in plastic, granular material cleaning, their dehydration. High degree of dehydration, the dehydration rate more than 95%, less power consumption, fast efficiency, high automation degree, greatly reduce the labor intensity. Dehydration is clean, can to clear off plastic particles of sand and small sundry. Production technology is advanced, convenient cleaning and low noise. The use of safe and all adopt the stainless steel, durable. Machine has the following main parts (main shaft, spindle motor, discharging port, the rotor blade, stainless steel screen mesh, cover, electrical box, into the hopper and feeding motor, reducer, feed screw.
Technical Parameters:
| Type | RD-4 |
| Capacity | 1.5-2T/h |
| Rotating Speed | 1400r/min |
| Voltage | 380V Three phase |
| Body shell thickness | 4 mm |
| Moter Power | 7.5kw |
| Self-pressure Motor Power | 1.5KW |
| Dimension | 1300*800*1800mm |
| Weight | 1T |
| Dia. of screen mesh | 18mm |
Additional Information:
- Item Code: SVD400
- Production Capacity: As per requirement
- Delivery Time: Immediate
- Packaging Details: wooden case or covered with PE film
View Complete details
EXPLORE MORE CATEGORIES